* USA SELLER* SuperMicro SYS-F628R2-FC0 4U SuperServer

Description

Product SKUs
SYS-F628R2-FC0
SuperServer F628R2-FC0 (
Black
)
Motherboard
Super X10DRFF-C
Processor/Cache
CPU
Intel® Xeon® processor E5-2600
v4
†
/ v3 family (up to 145W TDP)
*
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to
22 Cores
†
/ Up to
55MB
†
Cache
System Bus
QPI up to 9.6 GT/s
Note
†
BIOS version 2.0 or above is required
Note
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity
8x 288-pin DDR4 DIMM slots
Up to 1TB
†
ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
2400
†
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
On-Board Devices
Chipset
Intel® C612 chipset
SAS
SAS3 (12Gbps) via LSI 3008
SW RAID 0, 1, 10 support
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel® i210 Single Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
Aspeed AST2400 BMC Controller
Input / Output (per node)
SAS
8x SAS3 (12Gbps) ports
LAN
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB 3.0 ports
VGA
1x VGA port
Chassis
Form Factor
4U Rackmount
Model
CSE-F424BD-R1K28BP
Dimensions and Weight
Width
17.63" (448mm)
Height
6.96" (177mm)
Depth
29" (737mm)
Package
28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
Net Weight: 105 lbs (47.63 kg)
Gross Weight: 150 lbs (68.04 kg)
Available Colors
Black
Front Panel
Buttons
Power On/Off button
UID button
LEDs
Power status LED
Hard drive activity LED
2x Network activity LEDs
Expansion Slots (per node)
PCI-Express
1 PCI-E 3.0 x16 (LP) via riser card
Drive Bays (per node)
Hot-swap
8x 2.5" Hot-swap SAS/SATA HDD trays
System Cooling
Fans
8x 8cm 9.5K RPM Rear Fans and PWM fan speed control
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
1000W Output @ 100-140V, 8-12A, 50-60Hz
1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
Platinum Certified
[
Test Report
]
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
5°C to 40°C (41°F to 104°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
See Parts List
Parts List - (Items Included)
Part Number
Qty
Description
Motherboard / Chassis
MBD-X10DRFF-C
CSE-F424BD-R1K28BP
4
1
Super X10DRFF-C Motherboard
4U Chassis
Backplane
BPN-SAS-F424-B8
4
SAS backplane with 8x 2.5" drive bays for FAT TWIN systems
Cable 1
CBL-SAST-0664
8
internal mini SAS HD to 4 SATA 20cm, S, w/20cm SB, 30AWG, RoHS/REACH
Cable 2
CBL-PWEX-0486L-01
4
2x2 to 2x2 30cm power cable,18AWG,HF,RoHS/REACH,PBF
Cable 3
CBL-0486L
4
2x2 to 2x2 15cm power cable HF. 18AWG
Label
LBL-0108
1
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Manual
MNL-1656-QRG
1
Quick Reference Guide for SYS-F628R2-FC0,HF,RoHS/REACH
Riser Card
RSC-R1UFF-E16
4
1U LHS FatTwin Riser Card with PCI-E x16
Heatsink / Retention
SNK-P0048P
8
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Square ILM MB
Power Supply
PWS-1K28P-SQ
4
1U 1280W, redundant single output power supply
Terms and Conditions
Hours of Operation
Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.
Returns or Exchanges
Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after
30 days. All returns must be approved by Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.
Payment
We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged sales tax.
Shipping Info
We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service.
Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.
On May-18-12 at 01:07:15 PDT, seller added the following information:
FREE! Sellers: Add a FREE map to your listings. FREE!