* * * * * SuperMicro SYS-8026B-6RF 2U Rackmountable Barebone SuperServer

Description

Integrated Board
Super X8QB6-F
Key Features
1. Quad Intel® Xeon® processor 7500
series (8-Core) or new gen. Intel®
Xeon® processors E7-4800 family
(10-Core), with QPI up to 6.4 GT/s
2. Support 1TB DDR3 ECC Reg. DIMM
3. Auto-switch for: 2 (x16) PCI-E 2.0 or
1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
4 (x8) PCI-E 2.0 slots (in low profile)
4. Intel® 82576 Dual-Port Gigabit
Ethernet Controller
5. 6 Total Hot-swap Drive Bays:
6x SAS/SATA Drives Support
6. 1400W Gold Level Redundant
High-efficiency Power Supplies
7. LSI 2108 8-Port 6Gbps SAS Controller
built-in; Hardware RAID 0, 1, 5, 6,
10, 50 support
8. Integrated IPMI 2.0 with Dedicated LAN
Available Colors:
Black
Drivers & Utilities
BIOS
IPMI
Tested Memory
Tested HDD
Manuals
Product SKUs
SYS-8026B-6RF
SuperServer 8026B-6RF (
Black
)
Motherboard
Super X8QB6-F
Processor/Cache
CPU
Quad 1567-pin LGA Sockets
Supports up to four
Intel® Xeon® 64-bit
processor(s) of the same type below:
Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
QPI
up to 6.4 GT/s
System Memory
Memory Capacity
32x 240-pin DIMM sockets
Supports up to 1024 GB DDR3 ECC Registered memory at 1066/978/800MHz speed
Memory Mirroring supported
Memory Type
1333
*
/ 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB , 8GB , 32GB
**
Memory Voltage
1.5 V, 1.35V
**
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset
Intel® 7500 (Boxboro-EX) chipset
ICH10R
SAS
LSI 6Gbps SAS 2108 controller
RAID 0, 1, 5, 6, 10, 50 support
BBU (battery backup) extension kit (optional)
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® 82576 Dual-Port Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Matrox G200eW 16 MB DDR2
Super I/O
Winbond 83527HB chip
Input / Output
LAN
3x RJ45 LAN ports
USB
2x USB rear ports
2x USB internal headers (3 ports)
Total 5 USB 2.0 Compliant
VGA
1x VGA Port
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
System BIOS
BIOS Type
32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
Chassis
Form Factor
2U Rackmount
Model
CSE-828TQ-R1400LPB
Dimensions
Height
3.5" (89mm)
Width
17.2" (437mm)
Depth
27.9" (709mm)
Weight
Net Weight: 40 lbs (18.1 kg)
Gross Weight: 66.5 lbs (30.2 kg)
Available Colors
Black
Front Panel
Buttons
• Power On/Off button
• System Reset button
LEDs
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED
Expansion Slots (Low-Profile)
PCI-Express
Auto-switch for 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots
Drive Bays
Hot-swap
6x 3.5" Hot-swap SAS/SATA Drives Supported
Backplane
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
Peripheral Drives
DVD-ROM
Slim 8x DVD, 24x CD, DVD-ROM (optional)
System Cooling
Fans
3x 80mm heavy-duty fans with optimal fan speed control; 1x Air shroud
Power Supply
Redundant 1400W high-efficiency power supply with PMBus
AC Input
1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output
+5V standby
6 Amp
DC Output
+12V
100 Amp @ 100-140V
117 Amp @ 180-240V
With Power Distributor
+5V: 30 Amp
+3.3V: 25 Amp
-12V: 0.6 Amp
Certification
Gold Certified
[
Test Report
]
PC Health Monitoring
CPU
Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN
10x 4-pin fan headers with tachometer status monitoring
Low noise fan speed control mode
Temperature
Monitoring for CPU and chassis environment
Thermal Control for 10x fan connectors
Other Features
Chassis intrusion detection
Operating Environment / Compliance
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
Part Number
Qty
Description
Motherboard / Chassis
MBD-X8QB6-F
CSE-828TS-R1400LPBP
1
1
Super X8QB6-F Motherboard
SC828 2U Chassis
Backplane
BPN-SAS-828TQ
1
Sup 6x SAS/SATA hdd; SATA con
Cable 1
CBL-0097L-02
2
Ipass to 4 SATA, 51cm, W/51cm SB, S, 26AWG
CD
CDR-INTC-Q
1
Driver for Intel quad MBs
Heatsink / Retention
SNKP0045P
4
2U Passive CPU Heatsink for X8QBE/6
Optional Parts List
Part Number
Qty
Description
Cable
CBL-0420L
-
27" BBU extension to LSI iBBU07
LSI Accessory
BTR-0018L-0000-LSI
BTR-0018L-kit + CBL-0420L
-
-
LSI00161 IBBU07 BATTERY BACKUP FOR SAS2108
LSI iBBU07 extension kit (To Installed at 2.5" HDD Location)
Peripheral Drives
DVM-TEAC-DVD-SBT3
DVM-PNSC-DVD-SBT3
-
-
Black slim SATA DVD (8x DVD, 24x CDR), TEAC
BLACK PANASONIC SLIM DVD ROM SATA
Accessories (needed if above slim DVD is used)
MCP-220-81502-0N
-
Slim SATA DVD kit
*
Run at speed - 1066MHz
**
Please check
Tested Memory List
for compatibility; 32GB or 1.35V memory requires rev 2.0 or above boards with Millbrook II
Terms and Conditions
Hours of Operation
Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.
Returns or Exchanges
Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after
30 days. All returns must be approved by Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.
Payment
We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged sales tax.
Shipping Info
We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service.
Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.
On May-18-12 at 01:07:15 PDT, seller added the following information:
FREE! Sellers: Add a FREE map to your listings. FREE!