-40%

Supermicro P8SC8 Rev 1.2 Motherboard Socket 775 BULK PACK

$ 184.79

Availability: 100 in stock
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • MPN: P8SC8
  • Condition: New
  • Type: Motherboard
  • Brand: SUPERMICRO
  • Restocking Fee: 20%

    Description

    Product SKU
    - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
    SKU
    P8SC8
    Physical Stats
    Form Factor
    ATX
    Dimensions
    12" x 9.5 " (30.5cm x 24.0cm)
    Processor/Cache
    CPU
    Single LGA775 (Prescott) ZIF Socket
    Supports an
    Intel® Pentium® 4
    processor 6x0 or 5x0 sequence on 90nm process ONLY (800MHz FSB) or
    Supports an
    Intel® Celeron®
    processor with 256KB L2 Cache (533MHz FSB)
    Hyper-Threading (HT) enabled
    System Bus
    800 / 533 MHz system bus
    Operating System Software
    Supports 64-bit Operating Systems
    Supports 32-bit Operating Systems
    OS Compatibility Chart
    System Memory
    Memory Capacity
    Four 240-pin DIMM sockets
    Supports up to 4 GB DDR2 400 / 533MHz unbuffered ECC or Non-ECC memory
    Dual channel memory bus
    Memory must be populated in pairs
    Memory Type
    DDR2 400 / 533MHz unbuffered ECC or Non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    256MB, 512MB, 1GB
    Unbuffered ECC / non-ECC DDR2
    Total 256MB to 4GB memory
    Memory Voltage
    1.8V only
    Error Detection
    Corrects single-bit errors
    Detects double-bit errors (using ECC memory)
    On-Board Devices
    Chipset
    Intel E7221 (Copper River) chipset
    ICH6R + FWH + BCM5721
    Serial ATA
    Intel® ICH6R SATA controller
    RAID 0, 1, JBOD support
    SCSI
    Adaptec AIC-7902 Controller
    Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
    Host RAID 0, 1, 10, JBOD support
    RAID
    Support for Zero-Channel RAID
    Optional: (Card not included)
    IPMI
    Support for Intelligent Platform Management Interface v.2.0
    (
    Optional: AOC-IPMI20-E
    ) Card not included.
    Network Controllers
    2x Broadcom BCM5721 Gigabit Ethernet Controllers
    Supports 10/100/1000BASE-T, RJ45 output
    Graphics
    Onboard integrated server quality graphics in MCH
    Super I/O
    Winbond 83627THF chip
    Input / Output
    Serial ATA
    Four Serial ATA ports
    Four SATA hard drives supported
    IDE
    One EIDE channel supports up to two UDMA IDE devices
    Supports UDMA Mode 5, and ATA/100
    Floppy
    1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
    Infrared
    1x Infrared port header
    LAN
    2x RJ45 LAN port
    USB
    2x USB 2.0 / 1.1 ports
    4x USB 2.0 / 1.1 header for 4x ports
    VGA
    1x VGA port
    Keyboard / Mouse
    PS/2 keyboard and mouse ports
    Serial Ports
    1x Fast UART 16550 serial ports
    1x serial header
    Parallel Port
    1x ECP / EEP Parallel Port
    Chassis ( Optimized for P8SC8 )
    1U
    SC813MS-300C
    Important Note
    To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
    Expansion Slots
    PCI-Express
    2 (x1) PCI-e slots
    PCI-X
    1x 64-bit 100MHz PCI-X (3.3V) slot
    PCI
    1x 32-bit 33MHz PCI (5V) slot
    System BIOS
    BIOS Type
    8Mb Flash EEPROM with AwardBIOS®
    BIOS Features
    Plug and Play (PnP)
    PCI 2.2
    ACPI 1.0
    USB Keyboard support
    Management
    Software
    Optional IPMI (Intelligent Platform Management Interface) 2.0
    SuperDoctor® III
    Watch Dog
    NMI
    Power Configurations
    ACPI/APM Power Management
    Wake-On-Ring (WOR) header
    Wake-On-LAN (WOL) header
    Keyboard Wakeup from Soft-Off
    Power-on mode control for AC power loss recovery
    Internal/External modem remote ring-on
    PC Health Monitoring
    Voltage
    Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, +5V Standby
    CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
    FAN
    Total of five 3-pin fan headers
    5x fans with tachometer monitoring
    Status monitor with firmware / software speed control
    Support 3-pin fans
    Temperature
    Monitoring for CPU and chassis environment
    CPU thermal trip support
    Thermal control for 5x fan connectors
    I
    2
    C temperature sensing logic
    LED
    CPU / System Overheat LED
    +5V standby alert LED
    Other Features
    Chassis intrusion detection
    Chassis intrusion header
    OS Compatibility
    • Please see our
    OS Compatibility Chart
    Terms and Conditions
    Hours of Operation
    Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.
    Returns or Exchanges
    Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after
    30 days. All returns must be approved by Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.
    Payment
    We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged sales tax.
    Shipping Info
    We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service.
    Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.