E Bike electric scooter 48v Throttle with Key Digital Display 48 volt

Description

This universal throttle setup has 70 inches of wire attached with 2.8mm male ends attached in a 6 pin connector AND we send the opposite end connector with matching brass pins!...Will read 12-80volts! .Fits 7/8 handlebars, has a socket head to tighten down to keep it secure. This will plug n play to any of our variable speed kits we sell!
Upgrade your throttle on your electric scooter or e bike with this digital display throttle with built in key which is a much better way to monitor your battery with exact numbers and a key to keep it safe..
This throttle is anodised blue with ball milling for a custom look and comes with a convenient LED Digital display and a key switch that can be wired to your controller to prevent others from riding your bicycle or scooter without the key. Also includes with matching left side grip.
Installation instructions.
Three wires (red=5V from controller, black=ground, white=5v signal back to controller) provide standard throttle function.(does not need the yellow wire hooked up as you may have had to before)
Two additional bigger wires (yellow and red) are a switched 24v and provide the level for the LEDs.Which would hook up to your on/off switch..